|
|
Peripherals and
PACKS |
 |
WHAT IS THE PACK?
As hardware requirements evolve with increasing
speed, we want you to be able to respond quickly,
economically, and with minimal downtime. The PACK is
a cartridge system that allows peripheral devices to
easily mate with a JETT•XL®, Hydrus®, Hydrus® Luna, Hydrus® Luna GPS, and HANDGEAR®. It is similar in principle to a large compact FLASH card.
Another significant reason to utilize a PACK
approach is related to compliance testing.
Individual PACK devices may be tested separately.
This significantly eases the cost and time required
for compliance work. Market demand can be summarized
with a single phrase “If only it had…..” The PACK
provides an economical means to satisfy much of this
demand and “future-proof” your hardware investment.
|
WHAT DOES "PACK READY" MEAN?
The term “PACK Ready” refers to any one of our computer products that is delivered from our
factory with all of the components necessary to
allow the PACK system to be added at a later
date, without the need to return the device to Two
Technologies. PACK Ready means truly field
upgradeable! |
 |
|
WHAT CAN I PUT IN THE PACK?
|
Two Technologies offers a line of PACK
peripherals for our JETT and Hydrus family
of rugged
computers Including:
- various levels of GPS
- Portable Memory Sticks
- Cellular radios, GPRS/GSM or CDMA
- And even multi component modules where GPS and
GPRS are Incorporated into a single PACK
|
Customers are not limited by these choices. Using
the empty housing, an integrator can develop
customized peripheral devices appropriate to their
needs. Such components may Include:
- Custom RFID Readers
- Custom radios for meter reading
- Optical sensors for fiber optics
- Infrared sensors for temperature measurement
- Custom tachometers
|
|
Contact us today to
offer your peripheral or PACK
on our website! |
|
|
|
PACKS AND
PERIPHERALS OFFERED THROUGH TWO TECHNOLOGIES |
 |
HANDGEAR® PACK
Utilize the HANDGEAR expansion PACK system for additional standard and custom hardware systems such as temperature probes, proprietary radios, and meters. Two Technologies offers the HGP-3 Printer on Hydrus and HG models. Contact us today to learn more about the HG PACK. The HANDGEAR PACK is fully interchangeable with the Hydrus PACK system. |
|
|
|
|
Hydrus SD Adapter PACK
The new SD adapter PACK
for the Hydrus and Hydrus Luna allows for the use of a
standard SD memory card. The SD PACK facilitates access to
the SD card via an elastomeric seal without the removal of
any other accessories. The PACK is upgradable by customers
of existing Hydrus or Hydrus Luna.
CLICK FOR ADDITIONAL IMAGE VIEW
|
|
| More to come! Contact us with
questions about other available peripherals or to add your PACK to our
list. |
|
|
More to come!
Contact us with
questions about other available peripherals or to add your PACK to our
list. |
|
|
|
PACKS AND PERIPHERALS OFFERED THROUGH
OUR PARTNERS
|
Applied
Principles
|
The JETT•PACK Temperature module
measure temperatures using platinum resistance thermometers (PRTs).
The common industry standard PT100 is supported. PT100 Class A
sensors have an accuracy of +/-0.15 C. Changing sensor probes to
allow measurement of different surfaces or materials does not
require re-calibration of the Temperature Module.
Accuracy and Resolution
Although accurate temperature sensors are widely available, it has
been difficult to take advantage of them due to errors caused by the
measuring device.
|
 |
| The JETT•PACK Temperature module however, is
inherently accurate due to its novel design. Rather than relying on
voltage references (which tend to be temperature sensitive), it uses
'reference' resistors which are extremely stable (low temperature
co-efficient and drift). To achieve the 0.01 C resolution, a
state-of-the art ADC is used that can resolve to better than 1 part
in 65 thousand. |
|
Probes are available for specific requirements
Including:
• Air probe high temperature
• Air probe heavy duty
• Air probe fast response
• Immersion probe
• Insertion probe
Software
A software driver is provided for the JETT•PACK Temperature Module.
There is a simple driver that can be integrated into your
applications software.
•
Sensor PT100
•
Range -100 C to +200 C
•
Accuracy 0.01 C - At
0 C
•
Resolution 0.01 C
•
Connector Mini DIN 4 pin |
|
 |
Applied
PrInciples Ltd.
Tel: +44 01386 835757 / Fax: +44 (0)1386 47605
E-mail:
info@appliedprInciples.eu
/
www.appliedprInciples.eu
For questions about Hydrus compatibilty,
contact us today! |
|
RFID Inc.
|
|
The 3047E is a 125KHz read/write JETT•PACK®
which is operable with RFID tags from EM4102/4305,
Hitag, Hitag1, HitagS, and Temic 5551/5552/5557/ 5567/5577 (up to 4k bits of data). RFID, Inc also offers a 433 MHz read only
3047E-EXT2T
JETT•PACK for locating tagged assets at 70 feet of
range.
For more info: info@rfidInc.com
|
 |
Visit
the website:
http://www.rfidInc.com/ |
|
Two Technologies assumes no responsibility for, and disclaims
all liability for,
the
content of any off-site pages. All companies listed on this page are
independent from Two Technologies and all product support and
service inquiries should be directed to the appropriate company.
Copyright ©2010 Two Technologies, Inc.
All Rights Reserved.
|
|
|
Two Technologies, Inc.
/ 419 Sargon Way, Horsham, PA 19044 / 215.441.5305 /
real.rugged@2T.com /
www.2T.com |
|
